Standard

NS-EN 1125:1997

Withdrawn

Note: This standard has a new edition: NS-EN 1125:2008

Preview

Corrigendums and amendments are bought separately.

Language
Services

Abstract

This European Standard specifies requirements for the manufacture, performance and testing of panic devices mechanically operated by either a horizontal push-bar or a horizontal touch-bar specifically designed for use in a panic situation. This European Standard does not specify any particular design of panic device and only such dimensions as are required for safety reasons are specified. This European Standard does not cover specific devices intended for use by the severely disabled. Due to the wide range of disabilities, such devices and their performances should be agreed between specifier and manufacturer. Panic devices covered by this European Standard are for use on hinged or pivotted door leaves only, not exceeding 200 kg in mass, 2 500 mm in height and 1 300 mm in width. This European Standard covers two specific designs of panic devices : those designed for use on single leaf doors only, and those specifically designed for use on single leaf doors and/or double doorsets. This European Standard covers two specific types of horizontal bar operation : panic devices with "push-bar", type A (see 3.17 and figure 2) and panic devices with "touch-bar", type B (see 3.19 and figure 3). This European Standard covers two categories of device projection in order to maximize the width of the escape route and minimize the projection from the door face where either or both of these criteria are of importance (see 4.1.10). The suitability of a panic device for use on fire/smoke door assemblies is determined by fire performance tests conducted in addition to the performance tests required by this European Standard. Annex B indicates additional requirements for these products. This European Standard does not cover emergency exit devices operated by a lever handle or push-pad (see EN 179) or electrically controlled panic or emergency exit systems, standards for which are presently being developed (see annex E).

Document information

  • Standard from SN
  • Published:
  • Withdrawn:
  • Edition: 1
  • Version: 1
  • Document type: NAT
  • ICS 91.190
  • National Committee CEN/TC 33/WG 4

Legal references

EU law: 89/106/EEC

Product Relations

Product life cycle