Standard

SAE J2876

Revidert

Merknad: Denne standarden har en ny utgave: SAE J2876

For bestilling og priser av dette produktet ta kontakt med salg@standard.no

Omfang

This procedure establishes a recommended practice for performing a Low Speed Knee Slider test to the Hybrid III 50th Male Anthropomorphic Test Device (ATD or crash dummy). This test was created to satisfy the demand from industry to have a certification test which produces similar results to an actual low energy automotive impact test. An inherent problem exists with the current certification procedure because the normal (2.75 m/s) knee slider test has test corridors that do not represent typical displacements seen in these low energy impact tests. The normal test corridors specify a force requirement at 10 mm and at 18 mm, while the low speed test needs to have a peak displacement around 10 mm. Purpose The intent of this recommended practice is to develop a low speed knee slider test procedure for the H-III50M dummy with a 10 mm deflection range.

Dokumentinformasjon

  • Standard fra SAE_AC
  • Publisert:
  • Versjon: 0
  • Varetype: IS