Standard

SAE AMS5632K

Publisert
For bestilling og priser av dette produktet ta kontakt med salg@standard.no

Omfang

Form This specification covers two types of corrosion-resistant steel in the form of bars, wire, forgings, and forging stock. Application These products have been used typically for parts requiring resistance to both corrosion and wear with hardness up to 58 HRC, where the amount of machining warrants use of a free-machining steel, but usage is not limited to such applications. Certain design and processing procedures may cause these products to become susceptible to stress-corrosion cracking. ARP1110 recommends practices to minimize such conditions. Classification The steel compositions covered by this specification are classified as follows: Type 1: 17Cr - 0.50Mo - 0.22S (0.95 - 1.20C) Type 2: 17Cr - 0.50Mo - 0.20Se (0.95 - 1.20C) Unless a specific type is ordered, either Type 1 or Type 2 may be supplied.

Dokumentinformasjon

  • Standard fra SAE_AC
  • Publisert:
  • Versjon: 0
  • Varetype: IS
  • Tilleggsinformasjon
    • (Composition similar to UNS S44020 (Type I) or UNS S44023 (Type II))