Standard

SAE AMS5632K

Published

Singles purchase not accessible

This standard can not be purchased as a single sales.

Abstract

Form This specification covers two types of corrosion-resistant steel in the form of bars, wire, forgings, and forging stock. Application These products have been used typically for parts requiring resistance to both corrosion and wear with hardness up to 58 HRC, where the amount of machining warrants use of a free-machining steel, but usage is not limited to such applications. Certain design and processing procedures may cause these products to become susceptible to stress-corrosion cracking. ARP1110 recommends practices to minimize such conditions. Classification The steel compositions covered by this specification are classified as follows: Type 1: 17Cr - 0.50Mo - 0.22S (0.95 - 1.20C) Type 2: 17Cr - 0.50Mo - 0.20Se (0.95 - 1.20C) Unless a specific type is ordered, either Type 1 or Type 2 may be supplied.

Document information

  • Standard from SAE_AC
  • Published:
  • Version: 0
  • Document type: IS
  • Additional information
    • (Composition similar to UNS S44020 (Type I) or UNS S44023 (Type II))