Handlevagon 0
Standard

NS-EN ISO 2320:2008

Tilbaketrukket

Merknad: Denne standarden har en ny utgave: NS-EN ISO 2320:2015

Forhåndsvisning

Rettelser og tillegg kjøpes separat.

Språk
Tjenester

Omfang

ISO 2320:2008 specifies the mechanical and performance properties for prevailing torque type steel nuts when tested at an ambient temperature range of +10 °C to +35 °C. It includes a single test to determine the prevailing torque properties (performance properties) and/or the torque/clamp force properties. ISO 2320:2008 applies to prevailing torque all metal type nuts and prevailing torque non-metallic insert type nuts: a) with triangular ISO thread according to ISO 68-1; b) with diameter/pitch combination according to ISO 261 and ISO 262; c) with coarse pitch thread M3 to M39 and mechanical properties according to ISO 898-2; d) with fine pitch thread M8×1 to M39×3 and mechanical properties according to ISO 898-6; e) within the temperature range of -50 °C to +150 °C for prevailing torque all metal type nuts; f) within the temperature range of -50 °C to +120 °C for prevailing torque non-metallic insert type nuts. ISO 2320:2008 does not apply: 1) to nuts of type e), outside the range -50 °C to +150 °C for prevailing torque all metal type nuts, when it is necessary to consult an experienced fastener materials expert to determine appropriate choices for a given application; 2) to nuts of type f), when use at or near the temperature limits can reduce the prevailing torque capability of prevailing torque non-metallic insert type nuts and can require the use of an adequate non-metallic material — it is necessary to consult an experienced fastener materials expert for temperatures outside the range -50 °C to +120 °C for prevailing torque non-metallic insert type nuts to determine appropriate choices for a given application.

Dokumentinformasjon

  • Standard fra SN
  • Publisert:
  • Tilbaketrukket:
  • Utgave: 2008-11
  • Versjon: 1
  • Varetype: NAT
  • Products.Specs.pages
  • ICS 21.060.20
  • National Committee CEN/TC 185

Produktrelasjon

Produkt livssyklus