Standard

NS-EN 15313:2024

Publisert
Forhåndsvisning

Rettelser og tillegg kjøpes separat.

Språk
Tjenester

Omfang

To ensure safety and interoperability, this document gives:- the limits for in-service and off-vehicle wheelsets;- the operations to be carried out for which the specific values (and/or criteria) remain to be defined in the maintenance plan.This document applies to wheelsets and axleboxes complying with the following European standards:- EN 13103-1:2017+A1:2022;- EN 13260:2020, EN 13261:2020, EN 13262:2020;- EN 13979-1:2023;- EN 13715:2020;- EN 13749:2021+A1:2023;that comprise:- the axle fitted with wheels of diameters greater than or equal to 330 mm;- axleboxes with bearings and grease.This document is also applicable to wheelsets:- fitted with brake discs, final drive, transmission or noise-damping systems, as appropriate;- not complying with the above European standards, but complying with the international requirements in force, for example in UIC leaflets, before the approval of these standards;- with tyred wheels;- with resilient wheels.For equipment not covered by Directive (EU) 2016/797, this European Standard can be applied, noting that different values can be used.All dimensions in this document are in millimetres (mm).It is necessary to describe in a specific document the tasks to be performed in order to maintain wheelsets within the limits defined therein.NOTE The specific values and criteria are defined in an appropriate maintenance plan.

Dokumentinformasjon

  • Standard fra SN
  • Publisert:
  • Utgave: 2024-10
  • Versjon: 1
  • Varetype: NAT
  • ICS 45.040
  • National Committee SN/K 999/EG 35

Referanser i lov

EU lov: 2016/797/EU

Produktrelasjon

Produkt livssyklus