Handlevagon 0
Standard

NS-EN 12285-1:2003

Tilbaketrukket

Merknad: Denne standarden har en ny utgave: NS-EN 12285-1:2018

Forhåndsvisning

Rettelser og tillegg kjøpes separat.

Språk
Tjenester

Omfang

This standard specifies the requirements for shop fabricated cylindrical, horizontal steel tanks, single and double skin for the underground storage of water polluting liquids (both flammable and non-flammable) within the following limits: - from 800 mm up to 3000 mm nominal diameter and, - up to a maximum overall length of 6 times the nominal diameter and, - for liquids with a maximum density of up to 1,9 kg/l and, - with an operating pressure (po) of maximum 1,5 bar (abs.) and, - for double skin tanks with a vacuum leak detection system where the kinematic viscosity does not exceed 5 x 10-3 m2/s. This standard is applicable for normal operating temperature conditions (-20 °C to +50 °C). Where temperatures are outside this range, additional requirements should be taken into account. For guidance on the liquid-material combinations see Annex B. This standard is not applicable to the liquid classes listed in Table 1 because of special dangers involved. This standard does not deal with internal coating.

Dokumentinformasjon

  • Standard fra SN
  • Publisert:
  • Tilbaketrukket:
  • Utgave: 1
  • Versjon: 1
  • Varetype: NAT
  • Products.Specs.pages
  • ICS 13.300
  • ICS 23.020.10
  • National Committee SN/K 26

Referanser i lov

EU lov:
Lov referanseRestriksjoner
305/2011
89/106/EEC

Produktrelasjon

Produkt livssyklus