Standard

NEK IEC 60079-11:2023

Publisert

Rettelser og tillegg kjøpes separat.

Språk
Tjenester

Omfang

urn:iec:std:iec:60079-11:2023-01:::This part of IEC 60079 specifies the construction and testing of intrinsically safe apparatus intended for use in explosive atmospheres, and for associated apparatus which is intended for connection to intrinsically safe circuits which enter such atmospheres.This Type of Protection is applicable to electrical equipment in which the electrical circuits themselves are incapable of causing ignition of a surrounding explosive atmosphere. This includes electrical equipment which contains circuits that are intrinsically safe only under certain conditions, for example under battery supply with mains supply removed.This document is also applicable to electrical equipment or parts of electrical equipment located outside the explosive atmosphere or protected by another Type of Protection listed in urn:iec:std:iec:60079-0::::IEC 60079–0, where the intrinsic safety of the electrical circuits in the explosive atmosphere may depend upon the design and construction of such electrical equipment or parts of such electrical equipment. The electrical circuits exposed to the explosive atmosphere are assessed for use in such atmospheres by applying this document.This document applies to sensors connected to intrinsically safe circuits but does not apply to the protection of catalytic elements for Group IIC or Group IIB + H2.This document does not apply to Ex Equipment cable glands.The requirements for intrinsically safe systems are provided in urn:iec:std:iec:60079-25::::IEC 60079–25.This document supplements and modifies the general requirements of urn:iec:std:iec:60079-0::::IEC 60079–0, except as indicated in Table 1. Where a requirement of this document conflicts with a requirement of urn:iec:std:iec:60079-0::::IEC 60079–0, the requirement of this document takes precedence.Unless otherwise stated, the requirements in this document are applicable to both intrinsically safe apparatus and associated apparatus, and the generic term "apparatus" is used throughout the standard.As this document applies only to electrical equipment, the term "equipment" used in the standard always means "electrical equipment".This document applies to apparatus for use under the atmospheric conditions of urn:iec:std:iec:60079-0::::IEC 60079–0 with additional requirements for use at extended atmospheric pressures in the range from 60 kPa (0,6 bar), up to 110 kPa (1,1 bar).Ed.6(2011)(informative)Ed.7(2017)(informative)Clause / Subclause title(normative)Applies – This Clause / Subclause of urn:iec:std:iec:60079-0::::IEC 60079–0 is applied without change.Excluded – This Clause / Subclause of urn:iec:std:iec:60079-0::::IEC 60079–0 does not apply.Modified – This Clause / Subclause of urn:iec:std:iec:60079-0::::IEC 60079–0 is modified as detailed in this document.The applicable Clauses / Subclauses of urn:iec:std:iec:60079-0::::IEC 60079–0 are identified by the Clause / Subclause title which is normative. This document was written against the specific requirements of urn:iec:std:iec:60079-0:2017-12:::IEC 60079–0:2017 (Ed.7). The Clause / Subclause numbers for the 7th and previous edition are shown for information only. This is to enable the general requirements of urn:iec:std:iec:60079-0:2011-06:::IEC 60079–0:2011 (Ed.6) to be used where necessary with urn:iec:std:iec:60079-11:2023-01:::this part of IEC 60079. Where there were no requirements in the 6th edition but there are for the 7th edition (indicated by NR against the 6th edition only), or where there is a conflict between requirements, the later edition requirements take precedence.A shaded row in the above table indicates that this is a Clause heading. In cases where the applicability is the same for all the subclauses the 'Applies' or 'Excluded' is listed in the heading row and the subclauses are not expanded. Where the application of the individual sub-clauses may be different, these are expanded in the above table and the applicability for each is listed.Excluded except when 6.2.5.1 is applied, or as required by 9.4.1 or 9.11.Excluded for simple apparatus. See 3.1.5 and 5.5.

Dokumentinformasjon

  • Standard fra NEK
  • Publisert:
  • Utgave: 7.0
  • Versjon: 1
  • Varetype: NAT
  • Products.Specs.pages
  • ICS 29.260.20
  • National Committee NEK/NK31/204/216

Produktrelasjon