Handlevagon 0
Standard

MSS SP-154-2023

Publisert
Forhåndsvisning Forhåndsvisning er ikke tilgjengelig
Dette produktet er ikke tilgjengelig for enkeltkjøp

Omfang

This Standard Practice covers stainless-steel-lined, cast, or fabricated bonnetless, low pressure knife gate valves that are designed and manufactured to serve as a “Double Block and Bleed”(a) single valve system in pipelines. These valve types shall have flanged body designs compatible with ASME B16.5 flanges for NPS 2 (DN 50) through NPS 24 (DN 600) or ASME B16.47 Series A flanges for NPS 30 (DN 750) through NPS 36 (DN 900).NOTE: (a) For the purpose of this Standard Practice, “Double Block and Bleed” refers to a valve (or valve application) with two (2) seating surfaces that, in the closed position, provide a seal against pressure from both ends of the valve with a means of venting/bleeding the cavity between the seating surfaces.The valves identified in this Standard Practice are intended for use in applications where shock loadings are not encountered. Applications at conditions other than those specified in Section 4 require special design consideration. 

Dokumentinformasjon

  • Standard fra MSS
  • Publisert:
  • Versjon: 0
  • Varetype: IS
  • Products.Specs.pages

Produktrelasjon