Handlevagon
Konsolidert

IEC 60317-18:2004+AMD1:2009 CSV

Revidert

Merknad: Denne standarden har en ny utgave: IEC 60317-18:2020 ED4

Forhåndsvisning

Rettelser og tillegg kjøpes separat.

Språk
Tjenester

Omfang

IEC 60317-18:2004+A1:2009 specifies the requirements of enamelled rectangular copper winding wire of class 120 with a sole coating based on polyvinyl acetal resin, which may be modified providing it retains the chemical identity of the original resin and meets all specified wire requirements. Class 120 is a thermal class that requires a minimum temperature index of 120 and a heat shock temperature of at least 155 °C. The temperature in degrees Celsius corresponding to the temperature index is not necessarily that at which it is recommended that the wire be operated and this will depend on many factors, including the type of equipment involved. The range of nominal conductor dimensions covered by this standard is as follows: - width: maximum 16,0 mm; - thickness: maximum 5,60 mm. Wires of grade 1 and grade 2 are included in this specification and apply to the complete range of conductors. The specified combinations of width and thickness as well as the specified ratio width/thickness are given in IEC 60317-0-2. The main changes with respect to the previous edition are listed below: - new requirements for appearance, Subclause 3.2, added; - new pin hole test, Clause 23, added. This consolidated version consists of the third edition (2004) and its amendment 1 (2009). Therefore, no need to order amendment in addition to this publication. This publication is to be read in conjunction with IEC 60317-0-2:2005.

Dokumentinformasjon

  • Konsolidert fra IEC
  • Publisert:
  • Tilbaketrukket:
  • Utgave: 3.1
  • Versjon: 1
  • Varetype: IS
  • Products.Specs.pages
  • ICS 29.060.10
  • ISO TC TC 55

Produktrelasjon

Produkt livssyklus