Standard

SAE AMS-C-8073

Revised

Note: This standard has a new edition: SAE AMS-C-8073

Singles purchase not accessible

This standard can not be purchased as a single sales.

Abstract

1. SCOPE: 1.1 Scope: This specification covers the requirements for glass fabric base plastic honeycomb core materials for aircraft structural applications, including aircraft exterior parts, such as radio and radar antenna housings, and other parts. 1.2 Classification: 1.2.1 Class: Class fabric base plastic honeycomb core materials shall be of the following classes, as specified: Class I - Radar purpose Class II - General purpose (nonelectrical) 1.2.2 Types: Types of glass fabric base plastic honeycomb core materials shall be of the following types, as specified: Type I-A 3/16 inch cell size; 4 lbs/cu ft., nominal density Type I-B 3/16 inch cell size; 5.5 lbs/cu ft., nominal density Type I-C 3/16 inch cell size; 8.0 lbs/cu ft., nominal density Type II-A 1/4 inch cell size; 3.5 lbs/cu ft., nominal density Type II-B 1/4 inch cell size; 4.5 lbs/cu ft., nominal density Type II-C 1/4 inch cell size; 6.5 lbs/cu ft., nominal density Type II-D 1/4 inch cell size; 8.5 lbs/cu ft., nominal density Type III-A 3/8 inch cell size; 2.2 lbs/cu ft., nominal density Type III-B 3/8 inch cell size; 3.2 lbs/cu ft., nominal density Type III-C 3/8 inch cell size; 4.5 lbs/cu ft., nominal density Type III-D 3/8 inch cell size; 6.0 lbs/cu ft., nominal density

Document information

  • Standard from SAE_AC
  • Published:
  • Version: 0
  • Document type: IS
  • Additional information
    • Should Be Used Instead of MIL-C-8073, Which Was Cancelled on December 18, 1998