It is currently not possible to order printed and bound versions of standards. This is due to challenges related to our printing supplier. We are working to resolve the situation and apologize for any inconvenience this may cause. For other options, contact salg@standard.no.
Standard

NS-EN 694:2014

Published
Preview

Corrigenda and amendments are bought separately.

Language
Services

Abstract

This European Standard specifies the requirements and test methods for semi-rigid hoses for fire-fighting purposes for use with fixed systems. The hoses are intended for use at a maximum working pressure of 1,2 MPa for hoses of 19 mm and 25 mm inside diameter and 0,7 MPa for hoses of 33 mm inside diameter. Hoses conforming to this European Standard are intended for applications where long intervals can occur between the occasions of use, for example on fixed fire hose reels in buildings and other construction works. This European Standard applies exclusively to hoses for fire-fighting purposes intended for use at ambient conditions in non-aggressive or non-corrosive atmospheres within the temperature range −20 °C to +60 °C. NOTE 1 Hoses for use at ambient temperatures below −20°C can be supplied if they have been tested at the specified lower temperature in accordance with 6.4 and identified by their marking in Clause 8 f). NOTE 2 All pressures are expressed in megapascals. 1 MPa = 10 bar

Document information

  • Standard from SN
  • Published:
  • Edition: 2014-07
  • Version: 1
  • Document type: NAT
  • ICS 13.220.10
  • ICS 23.040.70
  • National Committee SN/K 161

Product Relations

Product life cycle