It is currently not possible to order printed and bound versions of standards. This is due to challenges related to our printing supplier. We are working to resolve the situation and apologize for any inconvenience this may cause.
Standard

NS-EN 1971-2:2019

Published
Preview

Corrigenda and amendments are bought separately.

Language
Services

Abstract

This document specifies a procedure for the eddy current test with an internal probe for measuring defects on the inner surface of seamless round copper and copper alloy tubes. This document applies particularly for finned tubes with high fins according to EN 12452. NOTE The eddy current test method(s) required, together with the size range and acceptance level, are defined in the relevant product standard. The choice of the method for eddy current test: - with an encircling test coil on the outer surface according to prEN 1971-1 or - with an internal probe on the inner surface according to prEN 1971-2 is at the discretion of the manufacturer if there are no other agreements between the purchaser and the supplier. Especially for finned tubes according to EN 12452 with high fins, it is suggested to use eddy current test with internal probe as described in this document.

Document information

  • Standard from SN
  • Published:
  • Edition: 2019-11
  • Version: 1
  • Document type: NAT
  • ICS 23.040.15
  • ICS 77.150.30
  • National Committee CEN/TC 133

Product Relations

Product life cycle