Shopping cart 0
Standard

NS-EN 10025:1990

Withdrawn

Note: This standard has a new edition: NS-EN 10025:1990+A1:1993

Preview

Corrigendums and amendments are bought separately.

Language
Services

Abstract

[As modified by Amendment A1 :1993] 1.1 This European Standard specifies requirements for long products and flat products of hot rolled non-alloy, base and quality steels in the grades and qualities given in tables 2 and 3 (chemical composition) and 5 and 6 (mechanical properties) in the usual delivery condition as given in 7.2. The steels specified in this European Standard are intended for use in welded, bolted and riveted structures, for service at ambient temperatures (subject to the restrictions described in 7.5.1). They are not intended to be heat treated except products delivered in the delivery condition N. Stress relief annealing is permitted. Products delivered in N condition may be normalized and hot formed after delivery (see clause 3). NOTE 1: Semi-finished products which are to be converted to rolled finished products conforming to this European Standard should be the subject of special agreement at the time of the enquiry and order. The chemical composition can also be agreed at the time of enquiry and order, however the values should be within the limits of table 2. NOTE 2: For certain grades and product forms suitability for particular applications may be specified at the time of the enquiry and order (see 7.5.3, 7.5.4 and table 7). 1.2 This European Standard does not apply to coated products and products for which other EURONORMS exist or European Standards dealing with steels for general structural applications are being prepared: - semi-finished products for forging in general purpose structural steel - (see EURONORM 30); - weldable fine grain structural steel - (see EN 10113 part 1 - 3); - structural steels with improved atmospheric corrosion resistance - (see EN 10155); - plates and wide flats made of weldable fine-grained structural steels in the quenched and tempered condition - (see prEN 10137 part 1 - 3) 1); - flat products in high yield strength steels for cold forming - wide flats, sheet/plate, wide and narrow strip - (see prEN 10149) 1); - steels for shipbuilding - normal and high strength qualities - (see EURONORM 156); - hot finished structural hollow sections (EN 10210-1). 1) Draft is under construction.

Document information

  • Standard from SN
  • Published:
  • Withdrawn:
  • Edition: 2
  • Version: 1
  • Document type: NAT
  • Pages
  • ICS 77.140.10
  • ICS 77.140.50
  • National Committee ECISS/TC 10

Product Relations

Product life cycle