Standard

NEK EN 16602-70-30:2014

Published
Preview

Corrigenda and amendments are bought separately.

Language
Services

Abstract

This Standard specifies requirements for preparing and assembling parts to be joined by wire wrapping, as well as the selection, calibration, use and certification of wire wrapping tools.The covered wire­wrapped connections are illustrated in Figure 1 1. This type of connection is similar to “Class A preferred” or “modified” connection detailed in MIL STD 1130, and NASA NHB 5300.4(3H).Only previously tested and qualified wire­wrapped connections are covered by this Standard, which includes four wire sizes from 24 AWGto 30 AWG, and three terminal post sizes up to 1,78 mm maximum diagonal. A step-by step procedure is covered in the informativeAnnex A.The use of heavier gauge wire and larger terminals is not generally prohibited, but it is considered unlikely that for such dimensions the method of wire­wrapping would be chosen as the electrical interconnection technique. Instead it is assumed that wire larger than 24 AWGwill be multi-stranded and terminated by solder

Document information

  • Standard from NEK
  • Published:
  • Edition: 1
  • Version: 1
  • Document type: NAT
  • ICS 49.140

Product Relations