It is currently not possible to order printed and bound versions of standards. This is due to challenges related to our printing supplier. We are working to resolve the situation and apologize for any inconvenience this may cause.
Standard

ISO 898-1:2013

Published
Preview

Corrigenda and amendments are bought separately.

Language
Services

Abstract

ISO 898-1:2013 specifies mechanical and physical properties of bolts, screws and studs made of carbon steel and alloy steel when tested at an ambient temperature range of 10 °C to 35 °C. Fasteners (the term used when bolts, screws and studs are considered all together) that conform to the requirements of ISO 898-1:2013 are evaluated at that ambient temperature range. They might not retain the specified mechanical and physical properties at elevated temperatures (see Annex B) and/or lower temperatures. Certain bolts and screws might not fulfil the tensile or torsional requirements of ISO 898-1:2013 because the geometry of their heads reduces the shear area in the head compared to the stress area in the thread. These include bolts and screws having a low or countersunk head. ISO 898-1:2013 is applicable to bolts, screws and studs made of carbon steel or alloy steel, having triangular ISO metric screw thread in accordance with ISO 68-1, with coarse pitch thread M1,6 to M39, and fine pitch thread M8×1 to M39×3, with diameter/pitch combinations in accordance with ISO 261 and ISO 262, and having thread tolerances in accordance with ISO 965-1, ISO 965-2 and ISO 965-4. It is not applicable to set screws and similar threaded fasteners not under tensile stress (see ISO 898-5). It does not specify requirements for such properties as weldability, corrosion resistance resistance to shear stress, torque/clamp force performance (for test method, see ISO 16047), or fatigue resistance.

Document information

  • Standard from ISO
  • Published:
  • Edition: 5
  • Version: 1
  • Document type: IS
  • ICS 21.060.10
  • ISO TC ISO/TC 2/SC 11

Product Relations

Product life cycle