Standard

ETSI EN 301 003-1

Not set

Corrigenda and amendments are bought separately.

Language
Services

Abstract

This first part of EN 301 003 specifies the signalling protocol for peak cell rate modification for the Broadband Integrated Services Digital Network (B-ISDN) at the TB reference point or coincident SB and TB reference point (as defined in ITU-T Recommendation I.413 [1]) by means of the Digital Subscriber Signalling System No. two (DSS2). In addition, the present document specifies the protocol requirements at the TB reference point where the service is provided to the user via a private B-ISDN. The capability described in the present document enables the connection owner to modify the peak cell rate for call/connections that have already been established. Peak cell rate modification is applicable to all connection oriented telecommunication services that are based on single point-to-point calls/connections, however, modification is not applicable to emulated N-ISDN services. The peak cell rate modification for point-to-multipoint calls/connections is outside the scope of the present document. The present document is applicable to equipment, supporting peak cell rate modification, to be attached at either side of a TB reference point or coincident SB and TB reference point when used as an access to the public B-ISDN. Further parts of the present document provide the method of testing and detailed application specific requirements to determine conformance to the present document. The provision of this service requires the support of the protocol for the basic point-to-point call/bearer connections as defined in the EN 300 443-1 [4].

Document information

  • Standard from ETSI_AC
  • Published:
  • Version: 0
  • Document type: IS
  • Additional information
    • V1.1.1; ITU-T RECMN Q.2963.1 (1996), Modified