Standard

API 510

Revised

Note: This standard has a new edition: API 510

Singles purchase not accessible

This standard can not be purchased as a single sales.

Abstract

General Application Coverage This inspection code covers the in-service inspection, repair, alteration, and rerating activities for pressure vessels and the pressure- relieving devices protecting these vessels. This inspection code applies to all refining and chemical process vessels that have been placed in service unless specifically excluded per 1.2.2. This includes: a. vessels constructed in accordance with an applicable construction code b. vessels constructed without a construction code (non-code)—A vessel not fabricated to a recognized construction code and meeting no known recognized standard c. vessels constructed and approved as jurisdictional special based upon jurisdiction acceptance of particular design, fabrication, inspection, testing, and installation d. non-standard vessels—A vessel fabricated to a recognized construction code but has lost it's nameplate or stamping. The ASME Code and other construction codes are written for new construction; however, most of the technical requirements for design, welding, NDE, and materials can be applied to the inspection, rerating, repair, and alteration of in-service pressure vessels. If an item cannot follow the ASME Code because of its new construction orientation, requirements for design, material, fabrication, and inspection shall conform to API 510 rather than to the ASME Code. If in-service vessels are covered by requirements in the ASME Code and API 510 or if there is a conflict between the two codes, the requirements of API 510 shall take precedence. As an example of the intent of API 510, the phrase "applicable requirements of the ASME Code" has been used in API 510 instead of the phrase "in accordance with the ASME Code." Intent The application of this inspection code is restricted to owner/users that employ or have access to the following technically qualified individuals and organizations: a. An authorized inspection agency; b. A repair organization; c. An engineer; d. An inspector; and, e. Examiners. Inspectors are to be certified as stated in this inspection code (see Appendix B). Since other codes covering specific industries and general service applications already exist (e.g. NB-23), the refining and petrochemical industry has developed this inspection code to fulfill their own specific requirements for vessels and pressure-relieving devices that fit within the restrictions listed in the scope. Limitations Adoption and use of this inspection code does not permit its use in conflict with any prevailing regulatory requirements. However, if the requirements of this code are more stringent than the requirements of the regulation, then the requirements of this code shall govern.

Document information

  • Standard from API_AC
  • Published:
  • Version: 0
  • Document type: IS
  • Additional information
    • Ninth Edition: Includes Errata April 2009