Standard

SAE AS5371A

Publisert
For bestilling og priser av dette produktet ta kontakt med salg@standard.no

Omfang

Purpose: This SAE Aerospace Standard (AS) establishes requirements for the manufacture of shim-type reference standards containing artificial flaws (notches) for use in the magnetic particle inspection process. Application: Shims have been used typically on ferromagnetic raw stock such as: bar, tubing, and pipe, forgings and castings and welded assemblies, but usage is not limited to such applications. Shims are applied to the surface of the part to establish field direction and approximate field strength. Shims may be used to establish and ensure balance of fileds in the multi-directional mangetization method. Two thickness are available, 0.002 inch (0.05 mm) or 0.004 inch (0.10 mm). The 0.002 inch (0.05 mm) shims are used when the thicker shims cannot conform to the surface of the part to be inspected in the area of interest. Two sizes are available, 0.75 inch (19.0 mm) square, as illustrated in Figures 1 through 4, and 0.79 inch (20.0 mm) square which are cut, by user, into four 0.395 inch (10.03 mm) square shims, as shown in Figures 5 and 6.

Dokumentinformasjon

  • Standard fra SAE_AC
  • Publisert:
  • Versjon: 0
  • Varetype: IS