Standard

NEK IEC TR 63304:2021

Publisert
Forhåndsvisning

Rettelser og tillegg kjøpes separat.

Språk
Tjenester

Omfang

IEC TR 63304:2021(E) describes the general principle and technical details of the methods of measurement of the DC magnetic properties of permanent magnet materials in an open magnetic circuit using a superconducting magnet (SCM). This method is applicable to permanent magnet materials, such as those specified in IEC 60404-8-1, the properties of which are presumed homogeneous throughout their volume. There are two methods: – the SCM-Vibrating Sample Magnetometer (VSM) method; – the SCM-Extraction method. This document also describes methods to correct the influence of the self-demagnetizing field in the test specimen on the demagnetization curve measured in an open magnetic circuit. The magnetic properties are determined from the corrected demagnetization curve. NOTE These SCM-methods can determine the magnetic properties of permanent magnet materials with coercivity higher than 2 MA/m. The methods of measurement in a closed magnetic circuit specified in IEC 60404-5 can lead to significant measurement error due to saturation effects in the pole pieces of yoke for the magnetic materials with coercivity higher than 1,6 MA/m (see IEC 60404-5).

Dokumentinformasjon

  • Standard fra NEK
  • Publisert:
  • Utgave: 1.0
  • Versjon: 1
  • Varetype: TR
  • ICS 17.220.20
  • ICS 29.030
  • National Committee NEK/NK68

Produktrelasjon

  • Adoptert fra: IEC TR 63304:2021