Handlevagon
Konsolidert

NEK IEC 60695-11-10:1999+AMD1:2003 CSV

Tilbaketrukket

Merknad: Denne standarden har en ny utgave: NEK IEC 60695-11-10:2013

Forhåndsvisning Forhåndsvisning er ikke tilgjengelig

Rettelser og tillegg kjøpes separat.

Språk
Tjenester

Omfang

Specifies a small-scale laboratory screening procedure for comparing the relative burning behaviour of vertically or horizontally oriented specimens made from plastic and other non-metallic materials, exposed to a small-flame ignition source of 50 W nominal power. These test methods determine the linear burning rate and the afterflame/afterglow times, as well as the damaged length of specimens. Applicable to solid and cellular materials that have an apparent density of not less than 250 kg/m3, determined in accordance with ISO 845. They do not apply to materials that shrink away from applied flame without igniting; ISO 9773 should be used for thin flexible materials. The test methods described provide classification systems which may be used for quality assurance, or the pre-selection of component materials of products. May be used for the pre-selection of a material, providing positive results are obtained at a thickness equal to the smallest thickness used in the application. Has the status of a basic safety publication in accordance with Guide 104. This consolidated version consists of the first edition (1999) and its amendment 1 (2003). Therefore, no need to order amendment in addition to this publication.

Dokumentinformasjon

  • Konsolidert fra NEK
  • Publisert:
  • Tilbaketrukket:
  • Utgave: 1.1
  • Versjon: 1
  • Varetype: NAT
  • Products.Specs.pages
  • ICS 13.220.40
  • ICS 29.020
  • National Committee TC 89

Produktrelasjon