Standard

SAE AS5272G

Published

Singles purchase not accessible

This standard can not be purchased as a single sales.

Abstract

This SAE Aerospace Standard (AS) establishes the requirements for heat-cured solid film lubricants. For other general or high-temperature applications, refer to AS1701. This document requires qualified products. Application For applications where temperatures may range from -90 to 400 °F (-68 to 204 °C). Type This specification establishes the following types: Type I: A lubricant capable of being cured within 60 minutes at 302 °F ± 27 °F (150 °C ± 15 °C) with an endurance life of 250 minutes minimum. See 6.4 for related product information. Type II: A lubricant capable of being cured within 60 minutes at 400 °F ± 27 °F (204 °C ± 15 °C) with an endurance life of 450 minutes minimum. See 6.4 for related product information. Type III: A low volatile organic compound (VOC) content lubricant capable of being cured within 120 minutes at 302 °F ± 27 °F (150 °C ± 15 °C) or within 60 minutes at 400 °F ± 27 °F (204 °C ± 15 °C) with an endurance life of 450 minutes minimum. Type III shall be used when performance is satisfactory for the desired application to meet VOC emission regulations. Color 1 - Natural product color. Color 2 - Black color. See 3.7. See 6.4 for related product information. Safety - Hazardous Materials While the materials, methods, applications, and processes described or referenced in this specification may involve use of hazardous materials, this specification does not address the hazards that may be involved in such use. The product manufacturer shall prepare Safety Data Sheets (SDS) in accordance with ANSI Z400.1/Z129.1 and abide by SDS requirements to ensure familiarity with the safe and proper handling of hazardous materials used and take necessary precautionary measures to ensure the health and safety of all personnel involved.

Document information

  • Standard from SAE_AC
  • Published:
  • Version: 0
  • Document type: IS