Standard

SAE ARP1111A

Published

Singles purchase not accessible

This standard can not be purchased as a single sales.

Abstract

This concept for measuring worn splines provides a direct wear depth dimension by utilizing the unworn involute surface as a contact point from which to measure the depth of wear on the spline tooth at the pitch diameter. Fig. 1 shows spline wear patterns and pitch diameter gaging points. Gages encompassing this concept would basically consist of fixed and movable probes which contact the unworn involute surface known as the form clearance and the worn surface at the pitch diameter thus providing a direct wear reading which is reflected on a dial indicator. Refer to paragraphs 4 and 5 and Fig. 2.

Document information

  • Standard from SAE_AC
  • Published:
  • Version: 0
  • Document type: IS