Standard

SAE AMS5934/H1000A

Published

Singles purchase not accessible

This standard can not be purchased as a single sales.

Abstract

Form This specification covers a corrosion-resistant steel product in the solution and precipitation heat treated (H1000) condition, 12 inches (305 mm) and under in nominal diameter, thickness, or, for hexagons, least distance between parallel sides. The aged product may be supplied directly by a mill or by another entity performing the functions of a producer as defined in AS6279. The latter would be accomplished by precipitation heat treatment of solution-treated material previously certified to AMS5934. The entity assuming responsibility for the aging operation is designated the producer of AMS5934/H1000. Application These products have been used typically for parts requiring corrosion resistance and high strength up to 600 °F (316 °C) with good ductility and strength in the transverse direction in large section sizes, but usage is not limited to such applications (see 8.3). Certain design and processing procedures may cause these products to become susceptible to stress-corrosion cracking after heat treatment. ARP1110 recommends practices to minimize such conditions.

Document information

  • Standard from SAE_AC
  • Published:
  • Version: 0
  • Document type: IS
  • Additional information
    • (Composition similar to UNS S13800)