Standard

SAE AMS5515P

Published

Singles purchase not accessible

This standard can not be purchased as a single sales.

Abstract

Form This specification covers a corrosion-resistant steel in the form of sheet, strip, and plate over 0.005 inch (0.13 mm) in nominal thickness. Application These products have been used typically for shallow and deep formed parts operating below 700 °F (371 °C) and requiring corrosion resistance, but usage is not limited to such applications. This alloy is satisfactory for use up to 1500 °F (816 °C) at low stress levels. However, the corrosion resistance is appreciably reduced when exposed to temperatures in the range 800 to 1100 °F (427 to 593 °C) for an extended time.

Document information

  • Standard from SAE_AC
  • Published:
  • Version: 0
  • Document type: IS
  • Additional information
    • (Composition similar to UNS S30200)