Standard

SAE AMS4128F

Published

Singles purchase not accessible

This standard can not be purchased as a single sales.

Abstract

Form This specification covers an aluminum alloy in the form of bars and rods 0.500 to 8.000 inches (12.7 to 203.2 mm) in nominal diameter or least difference between parallel sides and up to 50 square inches (322.6 cm2) in cross-sectional area (see 8.6). Application These bars have been used typically for parts where moderate ductility, formability, and response to precipitation heat treatment are required and where distortion during machining must be minimized, but usage is not limited to such applications.  

Document information

  • Standard from SAE_AC
  • Published:
  • Version: 0
  • Document type: IS
  • Additional information
    • (Composition similar to UNS A96061)