Standard

SAE AMS4035N

Published

Singles purchase not accessible

This standard can not be purchased as a single sales.

Abstract

Form This specification covers an aluminum alloy in the form of sheet and plate 0.010 to 1.750 inch (0.25 to 44.45 mm) in thickness, supplied in the annealed (O temper) condition. When specified, product shall be supplied in the “as fabricated” (F) temper (see 8.5). Application These products have been used typically for formed structural parts that will be subsequently heat treated, but usage is not limited to such applications. Certain design and processing procedures may cause these products to become susceptible to stress-corrosion cracking after heat treatment; ARP823 recommends practices to minimize such conditions.

Document information

  • Standard from SAE_AC
  • Published:
  • Version: 0
  • Document type: IS
  • Additional information
    • (Composition similar to UNS A92024)