Standard

SAE AMS-S-83318D

Published

Singles purchase not accessible

This standard can not be purchased as a single sales.

Abstract

Form This specification covers two-component polysulfide sealing compounds for quick repair of integral fuel tanks and fuel cell cavities. The sealing compound shall be capable of being cured as low as 20 °F (-7 °C), and be resistant to long term exposures from -65 to 250 °F (-54 to 121 °C). Application This intended use of this sealing compound is for quick repair of fuel tank sealing and cabin pressure sealing, but usage is not limited to such applications. It cures at room temperature and as low as 20 °F (-7 °C). Lower temperature cures require extended periods of time. AMS3100 adhesion promoter may be applied prior to application of the sealant in accordance with recommendations from the sealant manufacturer for specific substrates. Classification Sealing compounds covered by this specification are classified as follows: Class A - Suitable for application by brush. Available in the following application times in hours: [1/6 hour = 10 minutes]. A-1/6 Class B - Suitable for application by extrusion gun and spatula. Available in the following application times in hours: [1/6 hour = 10 minutes] B-1/6 Safety - Hazardous Materials Shall be in accordance with AS5502 (1.1).

Document information

  • Standard from SAE_AC
  • Published:
  • Version: 0
  • Document type: IS