It is currently not possible to order printed and bound versions of standards. This is due to challenges related to our printing supplier. We are working to resolve the situation and apologize for any inconvenience this may cause. For other options, contact salg@standard.no.
Standard

NS-ISO 10530:1992

Published
Preview

Corrigenda and amendments are bought separately.

Language
Services

Abstract

1.1Application rangeThis International Standard specifies a photometric method for the determination of dissolved sulfide in water. The method is applicable to the determination of dissolved sulfide in a mass concentration range from 0,04 mg/l to 1,5 mg/l.Higher concentrations may be determined by reducing and subsequently diluting the volume of the water sample used.The method is applicable to waste water and natural waters requiring filtration.1.2InterferencesThe following ions do not interfere with the method as long as the mass concentrations specified below are not reached or exceeded:Cyanide2 mg/lIodide20 mg/lThiosulfate900 mg/lThiocyanate900 mg/lSulfite700 mg/lWhen applying this procedure, the determination of the sulfide portion from polysulfides will be incomplete.Mass concentrations of carbon disulfide < 10 mg/l and/or ethyl mercaptan < 1 mg/l do not interfere with the method.Waters which are not filterable according to clause 6 cannot be analysed by this method. In those cases sulfide which is easily liberated at pH 4 is determined. (An International Standard covering this is being prepared.)

Document information

  • Standard from SN
  • Published:
  • Edition: 1
  • Version: 1
  • Document type: NAT
  • ICS 13.060.50
  • National Committee SN/K 153

Product Relations