It is currently not possible to order printed and bound versions of standards. This is due to challenges related to our printing supplier. We are working to resolve the situation and apologize for any inconvenience this may cause. For other options, contact salg@standard.no.
Standard

NS-EN ISO 7092:2000

Published
Preview

Corrigenda and amendments are bought separately.

Language
Services

Abstract

This International Standard specifies the characteristics of small-series, product-grade-A plain washers in the 200 HV and 300 HV hardness classes and of nominal sizes (nominal thread diameters) ranging from 1,6 mm to 36 mm inclusive. Washers of hardness class 200 HV are suitable for - cheese head screws in property classes up to and including 8.8, or made of stainless steel; - hexagon socket head cap screws in property classes up to and including 8.8, or made of stainless steel; - hexalobular socket head cap screws in property classes up to and including 8.8, or made of stainless steel; - case-hardened thread rolling screws with cheese heads. Washers of hardness class 300 HV are suitable for - hexagon socket head cap screws in property classes up to and including 10.9; - hexalobular socket head cap screws in property classes up to and including 10.9. If dimensions other than those listed in this International Standard are required, they should be selected from those given in ISO 887. When soft material pieces are clamped, or large clearance holes in the workpiece are used, the user should check the technical suitability of this type of washer.

Document information

  • Standard from SN
  • Published:
  • Edition: 1
  • Version: 1
  • Document type: NAT
  • ICS 21.060.30
  • National Committee CEN/TC 185

Product Relations

  • Adopted from: EN ISO 7092:2000 , 0