It is currently not possible to order printed and bound versions of standards. This is due to challenges related to our printing supplier. We are working to resolve the situation and apologize for any inconvenience this may cause. For other options, contact salg@standard.no.
Standard

NS-EN ISO 2612:2023

Published
Preview

Corrigenda and amendments are bought separately.

Language
Services

Abstract

This document describes several test methods for measuring the ammonia amount fraction in natural gas and biomethane at the trace level (µmol mol-1). The suitable handling and sampling of pressurised mixtures of ammonia in methane that are applied to several different ammonia measurement systems are described. The measurement systems are comprised of readily available commercial spectroscopic analysers that are specific to ammonia. These NH3 analysers are considered as a black box in terms of their operation, which is dependent on the instructions of the manufacturer. The document describes suitable calibration and measurement strategies to quantify ammonia in (bio)methane around and above the 10 mg m-3 (14 µmol mol-1) level and applies to analysis within absolute pressure ranges of 1 bar – 2 bar, temperatures of 0 °C – 40 °C and relative humidity References are also made to additional standards that are applied either to natural gas analysis or air quality measurements. In this document the matrix gas is always methane or biomethane and the measurand is the amount fraction NH3.NOTE            1 bar = 0,1 MPa =105 Pa; 1 MPa = 1 N/mm2.

Document information

  • Standard from SN
  • Published:
  • Edition: 2023-12
  • Version: 1
  • Document type: NAT
  • ICS 75.060
  • National Committee SN/K 32

Product Relations

  • Adopted from: EN ISO 2612:2023 , 0